The Transfer Board (also known as a Transfer Card) is an internal component that facilitates signal connections between LED modules and the cabinet. Note: Current models have largely transitioned to "3-in-1 Boards." This article is for legacy product maintenance and technical reference only. Key Functions: Signal Supplementing: Routes ...
The Dehumidification service (or Dehumidification process) can be used to protect the LED module(s) by displaying a dark screen and gradually transitioning to a lighter screen. The concept is to gradually remove humidity by slowly heating up the circuitry - since a lighter colored screen uses more power than a darker colored screen. The total p...
To ensure a seamless installation, a comprehensive assessment of the mounting location, structural integrity, power supply, and site logistics is mandatory. Steps and Checklist: Installation Environment Define the exact mounting location and ensure there is ample room for equipment (e.g., tools, ladders, scaffolding). Power and C...
Proper tools are essential for precise alignment and preventing electronic damage. The list includes measurement instruments, power tools, and mandatory ESD protection. Steps: Prepare tools according to the following categories: Measurement & Alignment Self-leveling laser level. Stud sensor/finder (multi-depth/material). 4-vial...
The core difference lies in the light source: TFT LCD uses a backlight filtered through liquid crystals, whereas dvLED features self-emissive pixels that turn on/off individually for superior contrast and efficiency. Comparison Highlights: Light Emission: TFT LCD requires a constant backlight, while dvLED is self-emissive, meaning each...
Answer: Please refer to the LED dead pixel specification in the User Manual to determine if it needs replacing, or contact the local service provider for proper assessment. Click each model to view detailed replacement specificationsDeactivated pixels determination for LED module replacement based on Acceptance Criteria for 1) whole dis...
Yes. Please make sure you follow the below steps. Turn off Wireless hotspot on LDM/LDC. (Settings --> Network --> Wireless hotspot --> Disable) Use Mouse to select the display in vCast under Display group settings --> Device list
Answer: The Receiving Card (aka Receiving Board) plays a part in supplementing LED Module signal connection. It is directly connected to the Transfer Board as shown in Diagram 1 below. Diagram 1: Receiving Card mounted onto Transfer Card Signal is taken from the Transfer Board and sent to the Receiving Card, thus distributing th...
Solution The signal will be sent from the “Main Board” and transmitted in three ways: 1) The first path is from the “Audio Board” to the “Speaker” 2) The second path is to the “RS232 Module” 3) The third path is from the “Transfer Board” to the “Receiving Board,” and from the “Receiving Board” to the “LED Module.” ...