Applied model: NMP-302W, NMP580-W, EP1042T 1. Click "Advanced" to enter advanced settings page. 2. Click left mouse key three times in the right bottom area with interval of one second 3. Then Android main page will appear 4. Click "Settings" to enter settings page 5. Check "Unknown source" under "Security" setting...
<Tiling Mode> In Tile Mode you can view an image in a larger scale by connecting multiple monitors. After all the displays are installed properly to a video wall, you need set the position of each display to determine how to display the input image. Once the position is set, the video source (e.g. computer) identifies the number of connect...
You can set the volume to 0 (to disable internal speaker volume) and set the Audio out (Line out) volume. The volume of the Audio out (Line out) is suggested to control by an external sound bar for higher output.
1. Download ADB from: https://developer.android.com/studio/command-line/adb.html 2. Press MENU 9 9 1 on the display's remote control to show the Service Menu or Debug Menu. 3. EP5540/ EP554T/EP5542/EP5542T: Service Menu > OS Setting > ADB Enable 4. CDE6520/CDE7520/CDE8620: Debug Menu > System Debug > ADB Switch 5. CDE4320/...
Please follow below steps: Click Start and then Control Panel, and next Hardware and Sound. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input. On the Display tab, under Display options, tap Calibrate and then Yes to allow the program to make changes. 4.Select the Touch input option. ...
ViewSonic Commercial Displays do not support antenna or coaxial cable connection.
You can click "Help"-->"Check update" in Tool bar to check is your Signage Manager newest or not, if not, you can click "Download" to update your Signage Manager.
NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.
You can refer below steps to check the issue. 1. To reset the NMP-302w. 2. To replace the HDMI(extension) cable. If above steps can't solve the issue, it will be NMP-302w mainboard issue, you need to replace NMP-302w.
To avoid screen damage, always handle the display by the back handles. Always place the display on a cushion pad after removal from the carton box. Please do not remove the rubber cushions around the display for a video wall installation. You may remove the rubber cushions around the display for a single screen installation.