ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...
1. On the Remote Control press INPUT 9 9 1 to enter factory mode. 2. Select Other Setting in the DEBUG MENU. 3. Select Boot Mode. 4. A dialog box will pop up. Select – Disable Embedded OS. 5. Press OK on the Remote Control and the system will reboot.
1. Format the USB disk as FAT32. 2. Unzip the “MstarUpgrade_848.zip” and then copy the .bin file to the USB disk (FAT32) in the root directory. 3. In Android mode, press the Source menu button, then press INPUT 9 9 1 to open the Service Menu. 4. Select "Firmware Update" and press OK. 5. Select "Upgrade Main" and press OK. ...
MAC address is available on a label outside the carton as below. If carton is not available, check it under Android system with details below. 1. Press HOME on RC and select Settings 2. Select Network 3. Select Ethernet 4. MAC address listed as below
Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005
Apply web URL https://developer.worldweatheronline.com/api/pricing.aspx
Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001
Please refer to below table: OS/Model/touch points CDE**61T CDE8452T Win 7 (except Starter and Home Basic) Win 8/8.1/10 20 points touch 10 points writing 10 points touch 5 points writing Linux (Kernel >=2.6.32 by patch) (Kernel >=3.5) 20 points touch 10 points writing 10 points touch 5 points writing An...
ViewSonic e-Posters do not support Power Point presentations natively. There are 3 ways to achieve this purpose. 1.Use vSignage: Models like EP4320/EP5520/EP5520T/EP5540/EP5540T have built in the vSignage. You are able to use the power point widget to publish your power point file from the computer to the e-Posters. 2. Connect a...
RS232 Communication Setting - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed) LAN Communication Setting - Type: Ethernet - Protocol: TCP/IP - Port: 5000 (fixed) - Cross subnet: No - Logon Credentials: No