Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below: You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the font panel but...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70. You can press remote control buttons : INPUT 0 2 1 4 quickly in sequence to restore the password to default.
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the menu and inpu...
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
1.Please turn on player’s HDMI CEC function. 2.Connect IFP and player in HDMI cable. 3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP. When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is turned on. <Note> Not all HDMI ports on IFP suppo...
Please manually set Date/Time to select correct time zone.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70 Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...
Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408
Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643