The ViewSonic® WoodPad™ series are a versatile drawing pad specifically made for illustrators, graphic designers, photo retouchers, office users and other digital artists. Crafted from renewable and lightweight bamboo, the 7.5” & 10.4" WoodPad™ delivers an eco-friendly and compact design that can be easily transported from home to office, to le...
WoodPad™ drawing pad is designed in 2 sizes – WoodPad 7 & WoodPad 10. With Electromagnetic Resonance Pen Technology (EMP), the pressure-sensitive stylus provides a battery-free design. Use WoodPad™ with Microsoft Ink to write notes on Microsoft Word, make changes directly on Powerpoint, or brainstorm ideas on Whiteboard. Compatible with an arra...
Selecting the right size drawing pad will be based on your personal preference, depending on how you plan to use it. The WoodPad™ series is currently available in 7.5” (small) and 10.4” (medium) size. The majority users purchase the most popular medium size which provides more space for drawing. If you have a limited working space or a portable...
Toggle between "iPad Mode" and "Capacitive Mode" by tapping the top touch sensor of the stylus. The current mode is indicated by the LED color. Steps: Locate the Sensor: Find the touch-sensitive area at the tail end (top) of the ACP501. Tap to Switch: Gently tap the top with your finger to cycle through modes: Green Light (iPad ...
1. When in use： Green light: iPad mode Blue light: Capacitive device mode 2. When Charging： Constant red light: Charging Flashing green light: Low power *The light will be off when the stylus is in charging
A full charge takes about 1.5 hours from 0% and will last for up to 11.5 hours of constant use. *Note* A 10-minute charge is about to support around 1 hour of use.
The ViewStylus ACP501 does not require Bluetooth pairing. If it’s not working, it is likely due to an active connection with another stylus or the incorrect mode being selected. Steps: Switch to iPad Mode: Tap the top of the stylus and ensure the LED indicator is Solid Green. Disconnect Other Styli: Go to [Settings] > [Bluetooth] on...
Please follow the steps below to replace the nib of ACP501. 1. Unscrew it in a counter-clockwise direction. 2. Place the tip upright facing upwards. 3. Remove the old nib then insert the new nib into the barrel of the pen. 4. Screw the tip back in a clockwise direction to secure.
Please follow below instructions to update firmware for EMP-022. 1. Please install the latest Pen Manager Driver for MacOS first. (1) Uninstall existing Pen Manager Driver for macOS (2) Reboot (3) Install latest Pen Manager Driver for macOS (4) Reboot (5) Open “Security & Privacy” > “Accessibility” > enable “DigitizerDriver”(If It’s alread...
Yes, the ID2456 is compatible with styluses that support the Microsoft Pen Protocol (MPP). The ViewStylus ACP501 is fully supported, provided that a firmware update is performed first. Steps: Verify Compatibility: Ensure your stylus is a ViewStylus ACP501 or another MPP-compatible device. Download Firmware: Visit the official download ...