Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below: You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the font panel but...
Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.
Please download the touch driver for Mac in below link or visit the product page on our website. IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
You may control IFP7550 by Hercules software. Please have "HEX" checkbox unchecked and key in ASCII command with <CR> at the end.
Please visit product page of IFP7550 in our website and check the section of "RELATED ACCESSORIES" list for details.
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.
Yes, IFP7550 can play 4K2K content.