Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643
The Hue and Sharpness settings are only adjustable for the Analog source such as AV in /VGA source.
This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.
You can use the Recovery button that locate at VPC front panel to recovery the OS system.
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
Please download the touch driver for Mac in below link or visit the product page on our website. IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download
1. You need to switch the Standby Mode to "Sleep" On IFP50. Please refer to this FAQ if you can not switch to this mode. 2. You can now use RS232 LAN command to power On/Off the IFP50 series.
Please refer to this video.
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099