Skip to main content

What is LAN communication setting for IFP8650?

The LAN Communication Setting for IFP8650 is shown below.

How do I disable the Android OS in IFP?

Please follow below instructions to disable the Embedded Player(Android OS).   Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Go to “Player Settings"-> "Embd Player" and turn it to OFF by using the direction button on remote control, choose OK button when prompt confirm messag...

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

What to do when the touch function has no response on the ViewBoard?

If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

How to play YouTube videos in HD (1080p) through the Chromium application

1. Launch the Chromium application on your IFP50 series display and navigate to: www.youtube.com.   2. Select a video to play. Once the video starts, tap on the video to show additional options.     3. Tap the cogwheel icon on the top right corner to open Playback Settings.   4. Set the Quality to 1080p.    NOTE: YouTube ...

When I login Google Drive or OneDrive, is it possible not to reveal the password letter by letter?

The login page is design by Google(Google Drive) or Microsoft(OneDrive), so we cannot change the typing password in the letters are visible and then hide design.

How to do when the message on my IFP5550/IFP6550/IFP7550/IFP8650, "The device has been locked, please use the U disk to unlock"?

1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...

Is it possible to have the slot-in pc power remains on while IFP screen’s off?

If you want slot-in pc stay powered on, short press the power button on the front panel or remote control to manually turn off the screen(backlight).

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.