ProjectorSupport - ViewSonic Luxembourg

What to do if there is spot on the projected image?

1.If spot is only visible when projected image in defocus, it would not impact usage. 2.If spot is visible when projected image in focus, please contact ViewSonic Service center for help.

Why is Netflix freezing after updating?

If Netflix is freezing after updating the application, please follow the steps below: Please make sure your Netflix application is downloaded from the ViewSonic application store. If a message appears in the Netflix application asking you to update, please press Cancel. If you have updated the Netflix application, please uninstall...

What devices support USB Type C video streaming on M1, M1+, M2 and X10-4K?

The USB Type-C port on your device must support DP Alt mode (DisplayPort Alternative Mode on USB-C). USB Type-C refers to the connector type, not the capability of the port itself, and please note that not all USB Type-C ports support video output (Video over USB Type-C). USB Type-C ports with any of the following symbols nearby will be...

LS921WU is not recognized nor controlled through the web browser by PJ-link

Applicable models: LS600W, PG707X, PG707W, PG706HD, PG706WU, LS831WU, LS750WU, LS850WU, LS860WU, LS920WU, LS921WU, PX728-4K, PX748-4K Please make sure the below webpage password is set in ViewSonic Network control first due to SB-327 law requirement. 1. Enter the IP address of the projector in the address bar of your browser and press E...

How to wirelessly mirror mobile phone/tablet screen to a smart projector?

Please follow below steps: Connect your device and projector to the same Wi-Fi network. 2. On projector, go to Home > Screen Mirroring, there is projector's device name shown at the upper right location. (e.g. "ViewSonic PJ-XXXX") 3.On your phone/tablet, do the following: iOS: Access...

How to make the screen fit my projector's display area?

Please refer to this FAQ: How to solve the overscan problem with my monitor?

How to change the projector image orientation (Flip or Mirror image)?

Access the "Projector Position" setting in the system menu to adjust the image based on your installation (Desktop, Ceiling, or Rear projection). Open Menu: Press the [Menu] button on your remote or projector. Navigate to Settings: Go to [System Setting: Basic] > [Projector Position]. Select Orientation Mode: Choose the option that ...

How to clean the projector lens

To clean the projector lens, do the following: Use a canister of compressed air to remove dust. If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the surface. CAUTION: Never rub the lens with abrasive materials

How to restore the projector to factory default settings?

Use the "Reset All Settings" or "Factory Reset" option in the menu to revert all configurations to their original state. Standard Projector Menu: Press [Menu] on your remote. Navigate to [System Setting: Advanced]. Select [Reset All Settings] and confirm. Smart Projector Menu (M-series / X-series): Go to the Home Screen...

What is the maximum resolution for the projector.

To locate the maximum or native resolution for a projector, there are a few places this can be found. We highly recommend using the native resolution for LCD displays as this will provide the clearest possible image from the device. Check the product page for your model on the Viewsonic website and you will see the native resolution displaye...