Please refer to this video.
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**30, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**30, IFP**70 Due to Android limitation, color temperature is only adjustable in other source(HDMI/PC, etc), not in Embd player...
You can press FREEZE button on remote control to freeze the screen.
When there is newer version, below Apps will be updated after connected IFP to internet. AirPlay Whiteboard for Android vCastReceiver myViewBoard Manager myViewBoard Live myViewBoard Display
IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input. Supported input sources: 1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.
ViewBoard 2.1 will automatically be activated when PC/laptop connects to IFP50/70 with an USB touch cable or please purchase a key to get it activated permanently.
There are some suggestions: 1.If IFP is under Sleep mode, please re-plug HDMI cable. 2.If IFP is on, turn windows to Hibernation (S4) mode, then IFP to Sleep mode. Wake up notebook then IFP will be awaken.
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.
To disable Airplay Service in vCast do the following： Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service