The login page is design by Google(Google Drive) or Microsoft(OneDrive), so we cannot change the typing password in the letters are visible and then hide design.
Please follow below instructions to add apps: The Android operating system is an open source platform that will allow you to install custom applications even when the Google Play store is not available. Follow the steps to begin installing custom applications. 1. Downloading the Application a. Download the application (.apk) file ...
We suggest refer to one of below cleaning methods. 1. Use the Side Tool Bar to clean all current processes. 2. Use vSweeper to clear memory and unwanted files. 3. Power off the Viewboard, then power it back on to clear all unnecessary data and close any running procedures. Note: Using Browser/Chromium to play 1080...
The Hue and Sharpness settings are only adjustable for the Analog source such as AV in /VGA source.
This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.
You can use the Recovery button that locate at VPC front panel to recovery the OS system.
1. Find your product's model number and visit ViewSonic's website to download the firmware. 2. Save the *.zip file to a local disk. 3. Extract the firmware files to a USB drive. a. For Gen. 1 units (IFPxx50), extract 'upgrade_510’ folder to the root of your USB drive (FAT32). b. For Gen. 2 units (IFPxx50-2/IFP50-2 EP), extract ‘upgrade_5...
Please download the touch driver for Mac in below link or visit the product page on our website. IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download
ViewSonic’s IFP6570 and IFP8670 USB Type-C port supports the below specifications: 1. DP alt mode: supported with DP1.4 (4K@60hz) 2. Power delivery specification: 60W (5V3A、9V3A、12V3A、15V3A、20V3A) 3. USB data transfer rate specification: USB 2.0 (480 Mbps) Note: USB Type-C refers to the connector type, not the capability of...
1. You need to switch the Standby Mode to "Sleep" On IFP50. Please refer to this FAQ if you can not switch to this mode. 2. You can now use RS232 LAN command to power On/Off the IFP50 series.