ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...
Please refer to below table: OS/Model/touch points CDE**61T CDE8452T Win 7 (except Starter and Home Basic) Win 8/8.1/10 20 points touch 10 points writing 10 points touch 5 points writing Linux (Kernel >=2.6.32 by patch) (Kernel >=3.5) 20 points touch 10 points writing 10 points touch 5 points writing An...
Yes. The capability for Enterprise authentication depends on the hardware specifications of the installed Wi-Fi module/dongle and its firmware compatibility. Instructions & Steps: Hardware Verification: Supported Wi-Fi security protocols are dictated by the Wi-Fi Module/Dongle. Please ensure your module supports 802.1X / WPA2-Enterprise ...
MAC address is available on a label outside the carton as below. If carton is not available, check it under Android system with details below. 1. Press HOME on RC and select Settings 2. Select Network 3. Select Ethernet 4. MAC address listed as below
You can click "Help"-->"Check update" in Tool bar to check is your Signage Manager newest or not, if not, you can click "Download" to update your Signage Manager.
Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005
You can refer below steps to use other widgets.
To ensure Signage Manager can discover and control players over a Local Area Network (LAN), please ensure that TCP 80, 8080, 443, and UDP 1900 are opened in your firewall settings. Port Configuration Table: Port TCP UDP Description 80 TCP Hypertext Transfer Protocol (HTTP), main communication port with legacy play...
Download ADB from https://developer.android.com/studio/command-line/adb.html 1. Run cmd commend and go to the adb save folder that connect to device via Adb over TCP, if use Adb wire, skip this step adb connect {ip} for example: adb connect 192.168.2.112 2. Take screenshot and save to device adb shell screencap -p /sdcard/...
While editing content with Signage Manager, it will compress and save photo in lower quality. Please follow below procedures to replace the photo. 1. After finishing editing in Signage Manager, choosing “Export to USB”. 2. Open “File Explorer” and locate USB drive in SMIL/media folder. 3. Copy original photos to this folder and...