PlayStation 5 and Xbox Series X/S consoles support video output up to 120 Hz. Follow the instructions below to configure 120 Hz output. <PlayStation 5> 1. Open "Settings". 2. Select "Screen and Video". 3. Select "Enable 120 Hz Output" under "Video Output". 4. Select "Automatic" in the pop-up menu. 5. Return...
Input lag means the time difference between when user controls PC and sees the response on monitor. There is a trade-off to picture/video performance. If no particular demand, it is suggested to set it to off.
This setting is to provide better picture performance if user’s screen are mostly dark scenes. If no special needs(ex: playing shooting games in dark scenes), it is suggested to turn off.
Certain preset modes (ViewMode) are factory-calibrated for specific visual tasks and will lock parameters to maintain optimal performance. Switch to [Standard] mode to regain manual control. Step-by-Step Instructions: Press the [Menu] button (located on the back or bottom of the monitor) to open the OSD menu. Navigate to the [ViewMode...
If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...
Please download the attachment and manually install the drivers under Win7 x64. File URL:https://support.viewsonic.com/helpdesk/attachments/33058629684
This is an indicator about power consumption ratio which is affected by some OSD settings change, ex. ECO mode and Brightness. Here's a matrix table about ECO mode and power consumption ratio. ECO mode Power consumption ratio Standard 100% Optimize 85% Conserve 70%
The VG2756-4K (via USB-C) by default can display 4K 60Hz, and the OSD setting for "USB 3.2" is Off. If the user turns "USB 3.2" On, then a USB-C connection can only display 4K 30Hz. There's not enough bandwidth for USB 3.2 speeds when connected via USB-C to output 4K 60Hz. This situation will only happen on a USB-C connection. If u...
The VG2755-2K/VG2455-2K (via USB-C) by default can display 2K 60Hz, and the OSD setting for "USB 3.2" is Off. If the user turns "USB 3.2" On, then a USB-C connection can only display 2K 30Hz. There's not enough bandwidth for USB 3.2 speeds when connected via USB-C to output 2K 60Hz. This situation will only happen on a USB-C connec...
Slight electronic humming is often normal (Coil Whine); however, persistent or loud noise may require environmental troubleshooting or technical support. Check Power Source: Plug the monitor directly into a wall outlet instead of a power strip to rule out electrical interference from other devices. Adjust Brightness: Try changing the b...